[. . . ] Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland).
0101
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). [. . . ] Batteries are not included.
1 Remove the battery cover.
2 Insert the batteries as shown.
3 Replace the cover.
1 Accessories
3 Removing the transport screw
Before turning the power on, be sure to remove this transport screw on the back of the unit using a flat head screwdriver or a coin.
Transport screw
Remote control × 1
AM loop aerial ×1
FM aerial × 1
AC power lead ×1
1
TINSE0104SJZZ 02D N TO 1
CDXP120HE_QG
1
02. 4. 10, 6:34 PM
4 System connections
FM aerial AM loop aerial
5 Turn on your system
The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.
Right speaker
Left speaker
1 Press
the EQUALIZER/X-BASS/ DEMO button to cancel the demonstration mode.
2 Press
the ON/STAND-BY button to turn the power on.
Wall socket (AC 230 V, 50 Hz)
Plain White line
2
CDXP120HE_QG
2
02. 4. 10, 6:34 PM
Listening to a CD (CDs)
Listening to the radio
1 2 3
Press the CD button. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position.
12 cm (5") 8 cm (3")
1 2
Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). X When the TUNING button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. q When cleaning the heads, pinch rollers, etc. , unplug the unit which contains high voltages.
TAPE 1
A B C D
Press the 0 button of TAPE 1 or TAPE 2 to start playback.
A Erase head B Recording/ Playback head C Capstan D Pinch roller E Playback head
s If trouble occurs
When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If the unit is not restored in the previous operation, unplug and plug in the unit, and then turn the power on.
TAPE 2
E
C
D
Note:
If neither operation above restores the unit, clear all the memory by resetting it.
q After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagenetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. [. . . ] Demagenetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. [. . . ]